Single-Core to Dual-Core Processor Upgrade Guide. First Edition - HP Integrity rx2620 (September 2006)

Upgrading the Processors in the Server
Introduction
Chapter 1
14
Introduction
This hardware upgrade guide lists the required components and provides the instructions for upgrading the
single-core processors to dual-core processors in an HP Integrity rx2620 server.
The upgrade guide is organized into the following sections:
• “Introduction” on page 14
• “Upgrade Checklist” on page 14
• “Upgrade Kit Contents” on page 15
• “Safety and Environmental Considerations” on page 16
• “Upgrade Preparation” on page 17
• “Upgrading the Server to Dual-Core Processors” on page 18
Time Required
Upgrading your HP Integrity rx2620 server from single-core processors to dual-core processors may require
several hours, depending on preparatory time, but you should plan for one hour of server downtime.
Preparatory time includes checking the upgrade kit, preparing an ESD-safe work area, and backing up your
data.
Upgrade Checklist
Use the following checklist to assist in completing your upgrade from single-core processors to dual-core
processors in an HP Integrity rx2620 server.
Table 1-1 Upgrade Checklist
Step Procedure Completed
1 Verify upgrade kit contents
2 Upgrade preparation
3 Update operating system
4 Update firmware
5 Shut down server
6 Install new processor(s)
7 Validate server upgrade
8 Power on the server