Single-Core to Dual-Core Processor Upgrade Guide. First Edition - HP Integrity rx2620 (September 2006)

Upgrading the Processors in the Server
Upgrading the Server to Dual-Core Processors
Chapter 1
33
Step 13. Use the CPU install tool shipped with your processor to lock the processor in place on the system
board. To do this, insert the CPU install tool between the turbofan blades into the lock, and rotate it
clockwise 180 degrees. Figure 1-20 shows how to lock the processor in place.
Figure 1-20 Locking the Processor Module in Place
Step 14. Slide the sequencing retainer plate toward the front of the server. Figure 1-21 shows how to slide
the sequencing retainer plate into place.
Figure 1-21 Slide the Sequencing Retainer Plate
Front of server
Processor tool
Front of server