FC2143 and FC2243 4Gb PCI-X 2.0 Host Bus Adapters for Linux and Windows Installation Guide

Physical specifications
Table 3 lists the HBA physical specifications.
Table 3 Physical specifica tions
Component
Range
Media interf
ace
The controll
er
connects to the physical media through an FC-0 Media Interface,
and
then conn
ects through a single (FC2143 HBA) or dual (FC2243 HBA) op tical
fiber LC connector.
Physical dimensions
Low-profile MD2 form factor, 6.600 inches by 2.536 inches, and accommodates
both the full-height and low-profile bracket.
Power requirements
In a PCI/PCI-X, Mode 1, 66MHz host:
•
1.5 watts (typical @ 3.3 VDC)
•
3.7 watts (typical @ 5.0 VDC)
•
5.6 watts (total)
In a
PCI/PCI-X, Mode 1, 100/1 33 MHz host:
•
1.5 watts (typical @ 3.3 VDC)
•
4.1 watts (typical @ 5.0 VDC)
•
6.0 watts (total)
In a PCI/PCI-X, Mode 2,133 MHz host:
•
1.5 watts (typical @ 3.3 VDC)
•
4.3 watts (typical @ 5.0 VDC)
•
6.0 watts (total)
Agency
approvals
Class 1
LaserProduct perDHHS21CFR (J) & EN60825-1
UL
reco
gnized to UL60950-1:2003
CUR
rec
ognized to CSA 22.2, No. 60950-1-03
Baurt-certified by TUV to 60950-1
FCC Rules, Part 15, Class A
Industry Canada, ICES-003, Class A
EMC Directives 89/336/EEC and 2004/108/EC (CE M ark)
EN55022, Class A
EN55024
Australian EMC Framework (C-Tick Mark)
AS/NZS CISPR22:2002
Class A Japan VCCI, Class A
Taiwan BSMI, Class A
Korea MIC, Class A
FC2143 and FC2243 4Gb PCI-X 2.0 host bus adapters for Linux and Windows installation guide
11