FC2143 and FC2243 4Gb PCI-X 2.0 Host Bus Adapters for Linux and Windows Installation Guide

8. Attach media:
a. Connect one end of the fiber optic cable to the LC connector on the HBA.
b. Connect the other end of the cable to the Fibre Channel device.
NOTE:
The HBAs do not allow normal data transmission on an optical li nk unless the link
is connected to a similar or compatible laser product; that is, both products are
mulitmode.
9. Turn on the computer and observe the power-on self-test (POST) LED results (see "POST LED
states" on page 21) .
FC2143 and FC2243 4Gb PCI-X 2.0 host bus adapters for Linux and Windows installation guide
15