FC2143 and FC2243 4Gb PCI-X 2.0 Host Bus Adapters for Linux and Windows Installation Guide
A Regulatory compli ance and
safety
Laser device
All HP systems equipped with a laser device comply with safety standards, including International
Electrotechnical Commission (I EC) 825. With specific regard to the laser, the equipment complies with
laser product performance standards set by government agencies as a Class1 laser product. The product
does
not emit hazardous light.
Laser safety warning
WARNING!
To reduce the risk of exposure to hazardous radiation:
• Do not try to
open the laser devi ce enclosure. There are no user-serviceable components inside.
• Do not operate controls, make adjustments, or perform procedures to the laser device other than
those
specified herein.
• Allow only
HP-authorized service technicians to repair the laser device.
Certification and classification information
This product contains a laser internal to the fiber optic (FO) transceiver for connection to the Fibre
Channel communications port.
In the USA, the FO transceiver is certifi ed as a Class 1 laser product conforming to the requirements
contained
in the Department of Hea lth and Human Services (DHHS) regulation 21 CFR, Subchapter J. A
label
on the plastic FO transceiver housing indicates the certification.
Outside the USA, the FO transceiver is certified as a Class 1 laser product conforming to the requirements
contained in IEC 825-1:1993 and EN 60825-1:1994, including Amendment 11:1996 and Amendment
2:2001.
FC2143 and FC2243 4Gb PCI-X 2.0 host bus adapters for Linux and Windows installation guide
25