HP Integrity rx2660 Server User Service Guide

2 Server Specifications
This chapter provides the specifications for the HP Integrity rx2660 server.
For more site preparation information, see the HP website and search for Generic Site Preparation
Guidelines.
System Configuration
Table 14 Hardware Specifications
HP Integrity rx2660Component
One or two Itanium single- or dual-core processors:Processors
• 1.6 GHz/6 MB cache single-core processor
• 1.4 GHz/12 MB cache dual-core processor
• 1.6 GHz/18 MB cache dual-core processor
• 1.6 GHz/12 MB cache single-core processor
• 1.42 GHz/12 MB cache dual-core processor
• 1.67 GHz/18 MB cache dual-core processor
Supports up to eight Double Data Rate 2 (DDR2) DIMMs mounted on the system board.Memory
Supported DIMM sizes are as follows:
• 512 MB
• 1 GB
• 2 GB
• 4 GB
• 8 GB
Minimum memory configuration is 1 GB (2 x 512-MB DIMMs).
Maximum memory configuration is 64 GB (8 x 8-GB DIMMs).
One to eight hot-pluggable SAS hard drives.Disk drives
For the PCI-X I/O backplane assembly:PCI slots
• One PCI-X slot @ 133 MHz
• Two PCI-X slots @ 266 MHz
For the PCIe/PCI-X I/O backplane assembly:
• One PCI-X slot @ 133 MHz
• Two PCIe slots @ PCIe x8
Eight port SAS core I/O card, or eight port SAS core I/O card with RAID expansion card.SAS core I/O
Two GigE LAN ports.LAN core I/O
Two serial ports, two USB 2.0 ports, one 10 Base-T/100 Base-T LAN port, and one optional
VGA port.
Management core I/O
One DVD-R or DVD+RW.Optical device
The Data Center server has one 900 watt (@120 VAC) or 1000 watt (@240 VAC) power
supply, 1+1 redundancy with second power supply.
The Office Friendly configuration includes two power supplies.
Power supply
System Configuration 35