HP Integrity rx2660 Server User Service Guide

%SYSINIT-I- waiting to form or join an OpenVMS Cluster

%VMScluster-I-LOADSECDB, loading the cluster security database

%EWA0, Auto-negotiation mode assumed set by console

%EWA0, Merl5704 located in 64-bit, 66-mhz PCI-X slot

%EWA0, Device type is BCM5704C (UTP) Rev B0 (21000000)

%EWB0, Auto-negotiation mode assumed set by console

%EWB0, Merl5704 located in 64-bit, 66-mhz PCI-X slot

%EWB0, Device type is BCM5704C (UTP) Rev B0 (21000000)

%EWA0, Link up: 1000 mbit, full duplex, flow control disabled

NOTE: Due to the type of server you purchased, your output might not exactly match the

output shown here.

6. Exit the console and iLO 2 MP interfaces when finished using them.

7. Enter Ctrl-B to exit the system console and return to the iLO 2 MP Main Menu. To exit the iLO

2 MP, enter x at the iLO 2 MP Main Menu.

Shutting Down OpenVMS

This section describes how to shut down the HP OpenVMS operating system on the server.

To shut down the OpenVMS operating system:

1. Log in to OpenVMS running on the server that you want to shut down.

Accessing the console through the iLO 2 MP enables you to maintain console access to the

server after HP OpenVMS has shut down.

Booting and Shutting Down HP OpenVMS 95