Installation Guide - HP AD397A rx2660 SAS Smart Array P400 Controller

Installing the SAS Smart Array P400 Controller
Installing the Smart Array Controller
Chapter 1
12
Figure 1-7 SAS Ports on the Smart Array P400 Controller Board
Step 3. Install the SAS Smart Array P400 controller card into the slot on the system board as shown in
Figure 1-7.
Step 4. Close the board lock over the tab on the SAS Smart Array P400 controller card and snap it shut.
Step 5. Attach the SAS cables to the SAS Smart Array P400 controller card. The SAS cables are clearly
marked A and B. Ensure they match up with the ports on the P400 controller card shown in
Figure 1-7.
CAUTION When connecting the SAS cables, match each cable with the appropriate socket on the SAS
Smart Array P400 controller card. If the cables are mismatched, the server may not reboot.
Both cables and sockets are clearly marked with the correct channels.
Installing the Smart Array P400 Controller Battery
Use these procedures to install the Smart Array P400 Controller battery.
Step 1. To install the P400 controller battery onto the airflow guide, follow these steps:
Card lock
(open)
SAS Smart Array P400
controller card
SAS ports on
the SAS Smart Array
P400 controller card
A
B
Memory card installed on
P400 controller card