Installation Guide - HP AD397A rx2660 SAS Smart Array P400 Controller

Installing the SAS Smart Array P400 Controller
Installing the Smart Array Controller
Chapter 1
13
a. Align the tabs on the P400 controller battery with the slots on the airflow guide.
b. Slide the P400 controller battery toward the rear of the server until the locking clip locks the
P400 controller battery in place.
Figure 1-8 Installing the RAID battery
Step 2. Plug the battery cable into the battery. See Figure 1-8.
Step 3. Plug the battery cable into the P400 controller card. See Figure 1-9.
Figure 1-9 Battery Cable Port on the P400 Controller Card
1
Battery cable
plugged into
battery
Battery cable
plugged into the
P400 controller
card