Installation Guide - HP AD397A rx2660 SAS Smart Array P400 Controller

Installing the SAS Smart Array P400 Controller

Creating Logical Drives

Chapter 1

Step 2. Use the

Arrow keys, Spacebar, and Tab to navigate around the screen and set up the logical drive,

including an online spare drive if one is required.

NOTE You cannot use ORCA to configure one spare drive to be shared among several arrays.

Only ACU enables you to configure shared spare drives.

Step 3. Press

Enter to accept the settings.

Step 4. Press F8 to confirm the settings and save the new configuration. After several seconds, the

Configuration Saved screen displays.

Step 5. Press

Enter to continue. You can now create another logical drive by repeating the previous steps.

NOTE Newly created logical drives are invisible to the operating system. To make the new

logical drives available for data storage, format them using the instructions given in

the operating system documentation.