Windows Integrity Management Agents Reference

Event DescriptionEvent SeverityEvent ID
DIMM thermal loading order warning Probable Cause: The current DIMM loading
order does not follow the guidelines in the user manual Recommended Action:
Rearrange the DIMMs to follow the loading order specified in the Maintenance and
Operation Manual SNMP Trap: hpevtMemDimmThermalLoadOrderWarn - 5623 in
HPIFPTRAP.MIB.Warning5623
The PD cannot boot, a majority of cells did not arrive at Rendezvous Probable Cause:
PD Rendezvous Boot Rules: If greater than 50% of the assigned cells are rendezvoused,
we will boot. If less than 50% of the assigned cells are rendezvoused, don't boot. If
exactly 50% of the assigned cells are rendezvoused, including all of the preferred
core cells, we will boot. If exactly 50% have rendezvoused, and there is a specified
preferred core cell not rendezvoused, don't boot. If exactly 50% have rendezvoused,
and there are no preferred core cells, don't boot. If any of the above apply in
preventing the boot. Reconfigure the PD and reboot. SNMP Trap:
hpevtCellMajorityNotPresent - 5626 in HPIFPTRAP.MIB.Error5626
INIT: Monarch failed in slave rendezvous Probable Cause: A processor has failed
rendezvous. Recommended Action: Reboot if necessary, if problem persists contact
your HP representative for support. SNMP Trap: hpevtInitRendezvousSlavesFail -
5638 in HPIFPTRAP.MIB.Warning5638
MC: I/O error log/clear error Probable Cause: SFW's Machine Check Handler was
unable to log or clear I/O error registers. Recommended Action: Reboot if necessary,
if problem persists contact your HP representative for support. SNMP Trap:
hpevtMcIoClearFail - 5646 in HPIFPTRAP.MIB.Warning5646
MC: MCA to BERR escalation not supported by PAL Probable Cause: Cannot escalate
an MCA to BERR. Recommended Action: Analyze Machine Check Logs using
diagnostic tools and EFI tools. SNMP Trap: hpevtMcPalCantEscalateToBerr - 5655
in HPIFPTRAP.MIB.Warning5655
MC: MCA to BINIT escalation not supported by PAL Probable Cause: Cannot escalate
an MCA to BINIT. Recommended Action: Analyze Machine Check Logs using
diagnostic tools and EFI tools. SNMP Trap: hpevtMcPalCantEscalateToBinit - 5656
in HPIFPTRAP.MIB.Warning5656
MC: Get PAL features failed Probable Cause: SFW failed to get the feature set from
PAL Recommended Action: Update firmware to get newer PAL that support the
PAL_GET_FEATUREs call. SNMP Trap: hpevtMcPalGetFeatFail - 5657 in
HPIFPTRAP.MIB.Warning5657
MC: Previous PAL rendezvous failed; rebooting Probable Cause: PAL Failed to
rendezvous the processors during a MCA. Recommended Action: Review error logs
to determine cause of MCA. If problem persists, contact HP support to troubleshoot
the problem. SNMP Trap: hpevtMcPalRendFail - 5658 in HPIFPTRAP.MIB.Warning5658
MC: Set PAL features failed Probable Cause: SFW failed to set the feature set from
PAL. Recommended Action: update newer system firmware with the new PAL that
support the PAL_SET_FEATURES call. SNMP Trap: hpevtMcPalSetFeatFail - 5659
in HPIFPTRAP.MIB.Warning5659
MC: Monarch failed in slave rendezvous Probable Cause: A slave failed to rendezvous.
Recommended Action: Reboot if necessary, if problem persists contact your HP
representative for support. SNMP Trap: hpevtMcRendezvousSlavesFail - 5677 in
HPIFPTRAP.MIB.Warning5677
MC_RENDEZVOUS: Rendezvous vector out of range Probable Cause: A bad
rendezvous vector has been registered. Recommended Action: Reboot if necessary
to re-register vector, if problem persists contact your HP representative for support.
SNMP Trap: hpevtMcRendezBadVectRange - 5679 in HPIFPTRAP.MIB.Warning5679
MC_RENDEZVOUS: No MC monarch Probable Cause: Software is making a
SAL_MC_RENDEZVOUS call when it shouldn't. Recommended Action: Just a
warning that software or OS is making a call when it shouldn't. SFW will ignore the
call when this happen. Need to fix OS or software to not make the
SAL_MC_RENDEZVOUS when there is no monarch processor chosen. SNMP Trap:
hpevtMcRendezNoMonarch - 5682 in HPIFPTRAP.MIB.Warning5682
30 Management Agents Event Tables