HP Integrity rx2660 Server User Service Guide

4. Replace the top access cover. See “Replacing the Top Cover” (page 142)
Removing and Replacing the Battery in the Socket
To replace the system or iLO 2 MP battery in the socket:
1. Remove the top access cover. See “Removing the Top Cover” (page 142).
2. Remove the power supply housing from the system board. Place the power supply housing
on an ESD protected surface.
IMPORTANT: Do not remove or replace the battery until the power supply housing has been
removed. Removal allows unobstructed access to carefully remove and replace the battery.
Figure 76 Power Supply Housing Removed For Battery Access
Removing and Replacing the System or iLO 2 MP Battery 185