HP Integrity rx2660 Server User Service Guide

7. To remove the battery from the top of the airflow guide:
a. Push the battery retaining clip away from the battery (1) as shown in Figure 80.
b. Slide the battery to disengage the battery posts from the slots on the airflow guide (2).
c. Lift the battery off of the airflow guide.
Figure 80 Removing the Battery from the Airflow Guide
Removing the PCIe Expansion Board
To remove the PCIe expansion board:
1. Power off the server and disconnect the power cables. See “Powering On and Powering Off
the Server” (page 77).
2. If rack mounted, slide the server completely out from the rack. See “Extending the Server from
the Rack” (page 141).
3. Remove the top cover. See “Removing the Top Cover” (page 142).
4. Pinch the board rail clips to the sides (1). See Figure 81 (page 191).
190 Removing and Replacing Server Components