HP Integrity rx2660 Server User Service Guide

NOTE: The last remaining configured CPU in a server cannot be deconfigured.
Example 9 cpuconfig command
Shell> cpuconfig
PROCESSOR INFORMATION
Proc Arch Processor
CPU Speed Rev Model Family Rev State
--- ------- --------- ------- ----- ------ -----
0 1.6Ghz B1 0 31 0 Sched Deconf
1 1.6Ghz B1 0 31 0 Active
ioconfig
Use this command to deconfigure or reconfigure I/O components or settings.
Syntax
ioconfig <fast_init | mps_optimize | wol> <on | off>
Parameters
<fast_init> specify device connection policy setting
<mps_optimize> specify PCIe MPS optimization setting
<wol> specify system wake-on-lan setting
<on|off> specify to configure or deconfigure a feature or component
Operation
The ioconfig file is used to retain information on the server I/O configuration across reboots.
The ioconfig file is created by insf at install time; and is modified by insf, rmsf, and ioscan
when devices are added or removed. The only purpose of the ioconfig file to maintain
configuration information when the system is not running.
EFI/POSSE Commands 221