HP Integrity rx2660 Server User Service Guide

Rear Panel Controls, Ports, and LEDs
The server rear panel includes communication ports, I/O ports, AC power connectors, and the
locator LED and button. LEDs located on the rear panel of the server signal the operational status
of the following components:
• iLO 2 MP
• System LAN
• Power supply
• PCI-X/PCIe slots
Figure 10 Rear Panel Control, Port, and LED Locations
10
iLO 2 MP LAN port
6
Auxiliary serial port
1
Power supply 1 and LED
2
Power supply 2 and LED
11
iLO 2 MP status LEDs
7
VGA port
8
USB ports
3
PCI-X/PCIe slots
12
iLO 2 MP reset
1394
Core LAN ports UID button/LEDConsole serial port
5
Smart Array P400
controller slot
NOTE: The Office Friendly server is shown in Figure 10 (page 31). The Data Center server might
only have one power supply installed.
iLO 2 MP
The server contains an iLO 2 MP on the system board to enable local and remote management of
the server. As long as AC power is present, the iLO 2 MP is active, regardless of whether the front
panel power switch is off or on.
Controls, Ports, and LEDs 31