HP Integrity rx2660 Server User Service Guide

Dimensions and Weight
Table 15 Rack- or Pedestal-Mounted Server Dimensions
ValueDimensions and Weight
Data Center Server Dimensions
• 67.3 cm (26.5 in)• Depth
• 48.3 cm (19 in)• Width
• 8.6 cm (3.4 in)• Height
Minimum configuration – 21 kg (46 lb)
Maximum configuration – 28 kg (61 lb)
Data Center Server Weight
2URack unit
Office Friendly Server Dimensions
• 69.0 cm (27.18 in)• Depth
• 27.6 cm (10.88 in) w/feet
12.7 cm (5 in) w/o feet
• Width
• 50.8 cm (20 in)• Height
Minimum configuration – 30 kg (66 lb)
Maximum configuration – 37 kg (81 lb)
Office Friendly Server Weight
Grounding
The site building shall provide a safety ground/protective earth for each AC service entrance to
all cabinets.
Install a PE (protective earthing) conductor that is identical in size, insulation material, and thickness
to the branch-circuit supply conductors. The PE conductor must be green with yellow stripes. The
earthing conductor is to be connected from the unit to the building installation earth or, if supplied
by a separately derived system, at the supply transformer or motor-generator set grounding point.
Electrical Specifications
This section provides electrical specifications for the server.
System Power Specifications
Available power (output) is the maximum DC power that the power supply can supply to the system.
Maximum input power is what the power supply requires from the AC line to deliver that maximum
DC output (given worst case efficiency and maximum loading).
Maximum input current is the worst case/highest current given the lowest input voltage and the
maximum input power.
Table 16 System Power Specifications
Total RatingParameter
200-240 VAC100-127 VAC100 VACInput voltage
7 A10 A10 AMarked input current
6.7 A10 A10 AInput current (maximum)
47 to 63 Hz47 to 63 Hz47 to 63 HzInput frequency
36 Server Specifications