HP Integrity rx2660 Server User Service Guide

2. Pull gently until the filler slides out of the server (2).
Figure 12 Removing a Hard Drive Filler
NOTE: SAS hard drives are loaded in order, starting with slot 8, going from right to left, to
slot 1.
Save the SAS hard drive filler for future use. For airflow purposes, always place hard drive
fillers in slots that do not contain SAS disk drives.
Installing a SAS Hard Drive
Figure 13 (page 44) shows how to install a SAS hard drive.
1. Insert the hard drive into the slot guides, and slide the drive into the slot until it seats into the
socket on the disk backplane (1).
2. Close the drive extraction handle by pushing it downward until it clicks into place (2).
Figure 13 Installing a SAS Hard Drive
44 Installing the Server