HP Integrity rx2660 Server User Service Guide

Installing the SAS Smart Array P400 Controller and RAID Battery
To install the SAS Smart Array P400 controller and the battery into the server:
1. Open the blue SAS Smart Array P400 controller board lock on the rear panel of the server.
SeeFigure 29 (page 60) shows the location of the board lock.
2. Install the SAS Smart Array P400 controller into the slot on the system board as shown in
Figure 29 (page 60).
3. Close the board lock over the tab on the SAS Smart Array P400 controller and snap it shut.
4. Attach the SAS cables to the SAS Smart Array P400 controller.
Figure 29 Board Lock
431
RAID battery port on
the SAS Smart Array
controller
SAS cable ports on the
SAS Smart Array P400
controller
SAS Smart Array
P400 controller
2
SAS Smart Array
P400 controller board
lock
60 Installing the Server