Installation Guide - HP AD397A rx2660 SAS Smart Array P400 Controller

Installing the SAS Smart Array P400 Controller
Installing the Smart Array Controller
Chapter 1
11
Figure 1-6 SAS Smart Array P400 Controller and PCI-e Expansion Board Slots
Step 3. Close the board locking guides to lock the PCI-e expansion card into place on the system board.
Installing the SAS Smart Array P400 Controller Card
To install the SAS Smart Array P400 controller card into the server, follow these steps:
Step 1. Install the 256 Mb memory card to the P400 controller card by snapping it into place. See
Figure 1-7.
Step 2. Open the blue SAS Smart Array P400 controller board lock on the rear panel of the server.
Front of
server
PCI-e
expansion
card (in slot)
SAS smart
Card
locking
guides
array P400
1
2
1
controller card
slot