Installation Guide, Third Edition - HP Integrity rx2660 Server

3. Open the processor cage.
a. Grasp the processor cage handle and apply adequate force to rotate the handle upward.
Figure 1-9 shows the processor cage handle open.
Figure 1-9 Processor Cage Handle
b. Use the handle to rotate the cage closure approximately 90 degrees toward the front of
the assembly until it stops.
Figure 1-10 shows the processor cage fully open.
Figure 1-10 Processor Cage Open
IMPORTANT: Ensure the processor slot is entirely exposed. The processor must clear the
cage enclosure for proper installation.
4. Locate the slot Module 1 on the system board for the processor installation.
26 Installing the Server