Site Preparation Guide, Third Edition - HP Integrity rx2660 Server

1 Server Specifications
This chapter provides the specifications for the HP Integrity rx2660 server.
This chapter addresses the following topics:
“System Configuration” (page 11).
“Dimensions and Weight” (page 12)
“Grounding” (page 12).
“Electrical Specifications” (page 12).
“Physical and Environmental Specifications” (page 13)
For general site preparation information, see the HP Generalized Site Preparation Guide on the HP
website at http://docs.hp.com
System Configuration
Table 1-1 lists the hardware specifications for the HP Integrity rx2660 server.
Table 1-1 Hardware Specifications
HP Integrity rx2660Component
One or two Itanium single- or dual-core processors:
1.6 GHz/6 MB cache single-core processor
1.4 GHz/12 MB cache dual-core processor
1.6 GHz/18 MB cache dual-core processor
1.6 GHz/12 MB cache single-core processor
1.42 GHz/12 MB cache dual-core processor
1.67 GHz/18 MB cache dual-core processor
Processors
Supports up to eight Double Data Rate 2 (DDR2) DIMMs mounted on the system board.
Supported DIMM sizes are as follows:
512 MB
1 GB
2 GB
4 GB
Minimum memory configuration is 1 GB (2 x 512 MB DIMMs).
Maximum memory configuration is 32 GB (8 x 4 GB DIMMs).
Memory
One to eight hot-pluggable SAS hard drives.Disk drives
For the PCI-X I/O backplane assembly:
One PCI-X slot @ 133 MHz
Two PCI-X slots @ 266 MHz
For the PCIe/PCI-X I/O backplane assembly:
One PCI-X slot @ 133 MHz
Two PCIe slots @ PCIe x8
PCI slots
Eight port SAS core I/O card, or eight port SAS core I/O card with RAID expansion card.SAS core I/O
Two GigE LAN ports.LAN core I/O
Two serial ports, two USB 2.0 ports, one 10 Base-T/100 Base-T LAN port, and one optional
VGA port.
Management core I/O
One DVD-R or DVD+RW.Optical device
The Data Center server has one 900 watt (@120 VAC) or 1000 watt (@240 VAC) power supply,
1+1 redundancy with second power supply.
The Office Friendly configuration includes two power supplies.
Power supply
System Configuration 11