HP Insight Management WBEM Provider Events Reference Guide

Event DescriptionEvent
Severity
Event ID
The link between the local CC and the local XBC is unexpectedly not initialized.
Probable Cause: An error initializing fabric. Recommended Action: A previously
reported event may provide exact detailsReboot, if failure persists, then either replace
the CC chip or the system backplane. WBEM EventID: 535. WBEM ProviderName:
FPL_IndicationProvider.Error5802
An invalid XBC number was given. Probable Cause: Firmware error. Recommended
Action: Reset cell. WBEM EventID: 536. WBEM ProviderName:
FPL_IndicationProvider.Error5803
An invalid XBC port number was given. Probable Cause: Firmware error.
Recommended Action: Reset cell. WBEM EventID: 537. WBEM ProviderName:
FPL_IndicationProvider.Error5804
A bad parameter was passed to the LED function in the utilities component. Probable
Cause: Contact FW engineering. This is a bug. WBEM EventID: 2464. WBEM
ProviderName: FPL_IndicationProvider.Warning5805
An unexpected neighbor type was read from a XBC PORT_NEIGHBOR_INFO CSR.
Probable Cause: Bad connection between XBC and cell. Recommended Action: Reset
cell. WBEM EventID: 539. WBEM ProviderName: FPL_IndicationProvider.Error5806
A given XBC port is not a valid XBC-CC port. Probable Cause: Firmware error.
Recommended Action: Reset cell. WBEM EventID: 540. WBEM ProviderName:
FPL_IndicationProvider.Error5807
A XBC port was unexpectedly found to be an invalid XBC-XBC port. Probable Cause:
Firmware error. Recommended Action: Reset cell. WBEM EventID: 541. WBEM
ProviderName: FPL_IndicationProvider.Error5808
The XBC neighbor chip number does not match the expected value for this topology.
Probable Cause: Bad connection between XBC and cell. Recommended Action: Reset
cell. WBEM EventID: 542. WBEM ProviderName: FPL_IndicationProvider.Error5809
The XBC neighbor port number does not match the expected value for this topology.
Probable Cause: Bad connection between XBC and cell. Recommended Action: Reset
cell. WBEM EventID: 543. WBEM ProviderName: FPL_IndicationProvider.Error5810
Write through to BMC token failed. Probable Cause: Problem accessing the BMC.
Recommended Action: Reset BMC or reboot. Upgrade BMC FW and System FW. If
problem persists, contact your HP representative for support. WBEM EventID: 544.
WBEM ProviderName: FPL_IndicationProvider.Warning5811
Utilities reported an error while trying to manipulate the LED. Probable Cause: It is
likely the GSP is not present or the device specified is not present. Solve these
problems and try again. WBEM EventID: 2465. WBEM ProviderName:
FPL_IndicationProvider.Warning5812
Duplicate Cpu Ids were detected within a cell. Probable Cause: Most likely cause is
a bad CPU module connection on the cell board. Replace the cell board. Recommended
Action: Replace the cell board. WBEM EventID: 546. WBEM ProviderName:
FPL_IndicationProvider.Error5813
OS crashdump started (D700). Probable Cause: panic occurred. WBEM EventID: 547.
WBEM ProviderName: FPL_IndicationProvider.Warning5823
OS legacy PA hex fault code (Bxxx). Probable Cause: fault/panic. WBEM EventID:
548. WBEM ProviderName: FPL_IndicationProvider.Error5824
Setting processor response timeout failed. Probable Cause: A PAL call made by SFW
has failed. Recommended Action: Reboot if necessary, if problem persists contact
your HP representative for support. WBEM EventID: 550. WBEM ProviderName:
FPL_IndicationProvider.Warning5827
38 WBEM Provider Event Tables