HP Insight Management WBEM Provider Events Reference Guide

The TPM DOT information is not initialized. Probable Cause: The System Firmware
has detected an uninitialized shared memory table for the TPM. This can be caused
by manageability firmware/hardware. Recommended Action: The system will try to
initialize the memory table. If the error persists, review the event log for related MFW
events to determine if there is an NVM (Non-Volatile Memory) problem.Try a MFW
reset via web or text interface. If this fails, verify all the firmware versions are at a
supported revision level and do a full power cycle of the system.Replace the battery.
WBEM EventID: 8329. WBEM ProviderName: FPL_IndicationProvider.Warning13722
The TPM DOT information could not be initialized successfully. Probable Cause:
The System Firmware has detected an uninitialized shared memory table for the
TPM and failed to initialize it. This can be caused by an error with Manageability
firmware/hardware. Recommended Action: Review the event log for related MFW
events to determine if there is an NVM (Non-Volatile Memory) problem.Try a MFW
reset via web or text interface. If this fails, verify all the firmware versions are at a
supported revision level and do a full power cycle of the system. WBEM EventID:
8327. WBEM ProviderName: FPL_IndicationProvider.Warning13724
The TPM DOT information could not be updated with the TPM presence indication.
Probable Cause: The system could not initialize the value of the TPM presence flag
in NVM (Non-Volatile Memory) possibly due to an error on manageability.
Recommended Action: Review the event log for related MFW events to determine
if there is an NVM (Non-Volatile Memory) problem.Try a MFW reset via web or text
interface. If this fails, verify all the firmware versions are at a supported revision
level and do a full power cycle of the system. WBEM EventID: 8325. WBEM
ProviderName: FPL_IndicationProvider.Warning13726
The TPM DOT could not be updated with the TPM absent flag. Probable Cause: The
system could not initialize the value of the TPM presence flag to Absent in NVM
(Non-Volatile Memory) possibly due to an error on Manageability. Recommended
Action: Review the event log for related MFW events to determine if there is an NVM
(Non-Volatile Memory) problem.Try a MFW reset via web or text interface. If this
fails, verify all the firmware versions are at a supported revision level and do a full
power cycle of the system. WBEM EventID: 8326. WBEM ProviderName:
FPL_IndicationProvider.Warning13727
The TPM mode at next boot command could not be cleared in the TPM DOT table.
Probable Cause: The system could not clear the command to change the TPM state
at next boot in the NVM (Non-Volatile Memory) possibly due to an error on
manageability firmware/hardware. Recommended Action: Review the event log for
related MFW events to determine if there is an NVM (Non-Volatile Memory)
problem.Try a MFW reset via web or text interface. If this fails, verify all the firmware
versions are at a supported revision level and do a full power cycle of the system.
WBEM EventID: 8323. WBEM ProviderName: FPL_IndicationProvider.Warning13728
The command to change the TPM state has failed. Probable Cause: The request to
change the TPM state has failed. An error occurred with the TPM. Recommended
Action: Review the event log for TPM related messages. Reboot the system. Replace
the TPM board. WBEM EventID: 8332. WBEM ProviderName:
FPL_IndicationProvider.Warning13730
Failed to acquire platform specific data in ACPI. Probable Cause: Corrupted SFW
image. Recommended Action: Ensure SFW component is at supported level. WBEM
EventID: 8533. WBEM ProviderName: FPL_IndicationProvider.Error13741
Failed to acquire platform specific data in ACPI. Probable Cause: Corrupted SFW
image. Recommended Action: Ensure SFW component is at supported level. WBEM
EventID: 8527. WBEM ProviderName: FPL_IndicationProvider.Error13742
Failed to acquire platform specific data in ACPI. Probable Cause: Invalid SFW image.
Recommended Action: Ensure SFW component is at supported level. WBEM EventID:
8546. WBEM ProviderName: FPL_IndicationProvider.Error13743
Failed to acquire platform specific data in ACPI. Probable Cause: Invalid SFW image.
Recommended Action: Ensure SFW component is at supported level. WBEM EventID:
8535. WBEM ProviderName: FPL_IndicationProvider.Error13744
Platform Events 93