HP Integrity rx2800 i2 - HP-UX Errata: Additional HP-UX 11i v3 (B.11.31) drivers, products, and patches

Table Of Contents

HP-UX Errata for HP Integrity rx2800 i2

Additional HP-UX 11i v3 (B.11.31) drivers,

products, and patches

Part Number: AH395-9010A

First edition: November 2010

PAGE 1
HP-UX Errata for HP Integrity rx2800 i2 Additional HP-UX 11i v3 (B.11.
PAGE 3
Introduction HP requires the installation of the HP-UX 11i v3 OE Update Release for September 2010 and the additional components from this Errata document for the initial HP-UX support of these new HP Integrity server models. The new HP Integrity rx2800 i2 systems cannot be supported on OE Update releases before September 2010. Please download the additional components from the HP Software Depot site: http://software.hp.com and the IT Resource Center: http://itrc.hp.com.
PAGE 4
Additional Requirements Patch required for HPVM 4.2.5 host (can be found at http://itrc.hp.com): • PHSS_41543: 11.31 HPVM B.04.20.05 CORE PATCH Patches required for HPUX 11i v2 HPVM guests (can be found at http://itrc.hp.com): • PHCO_40685: 11.23 Cumulative machinfo command patch • PHKL_40684: 11.23 Itanium 2 Processor information reporting For other HP-UX information, go to: http://www.hp.