SmartSetup Scripting Toolkit Administrator's Guide

applied to Smart Array controllers with the
hpacuscripting tool.
This file is created when the
readhwconfig option is executed.
conrep.dat A file into which the conrep tool saves
the values of the EFI variables contained
in the conrep.xml configuration file.
This file is created when the readhwconf
action is executed.
hwdisc.dat The hwdiscovery output file that
contains a system inventory to be used by
the ifhw and hwquery utilities.
This file is created when the readhwconf
action is executed.
hba-qlogic.ini The QLogic HBA configuration file, used
to enable or disable boot devices on
QLogic host bus adapters (HBAs).
This file is created when the readhwconf
action is executed.
hba-emulex.ini The Emulex HBA configuration file, used
to enable or disable the boot devices on
Emulex HBAs.
This file is created when the readhwconf
action is executed.
logs This folder stores log files that are created
during SSTK execution. Use the log files
to monitor the deployment process and to
troubleshoot any problems.
oem Contains the OEM drivers used by the OS setup process.
os Contains Windows Server 2008 SP2 and Windows Server 2008 R2 installation
files and their respective answer files for unattended installations. See “Uploading
the Windows installation files” (page 22).
scripts Contains the following SSTK Windows configuration and installation scripts that
control SSTK execution, run the utilities, and deploy Windows:
SSTKConfig The main SSTK configuration file in which
you set the action for SSTK to take each
time a system boots to SSTK WinPE. You
must edit this script before initiating an OS
deployment. See “Editing the
SSTKConfig.cmd file” (page 25).
SSTKMain Controls the SSTK execution depending
on the configured action.
ReadHWConf Called if the configured action is
readhwconf. It calls hwdiscovery,
conrep, the Emulex and QLogic
configuration tools, and
hpacuscripting. See “readhwconf
action” (page 19).
Extracting the SSTK package 9