HP Integrity rx2800 i2 Server User Service Guide

Removing the server from the pedestal kit
Required tools
No tools are required for disassembling the pedestal kit.
Power off the server and remove cables
1. Power off the server (“Powering off the server” (page 106)).
2. Disconnect the power and LAN cables connected to the server.
Removing the pedestal kit
1. Remove pedestal feet.
Figure 24 Removing the pedestal kit feet
2. Remove the pedestal side pieces by unscrewing the captive thumbscrews on the rear of the
pedestal kit, and sliding the side pedestal kit pieces toward the back of the server.
Preparation procedures 107