Conversion Guide - HP Integrity rx3600 Rack to Pedestal

Removing the Pedestal Sides
Follow these steps to remove the pedestal sides.
1. Unscrew the thumb screws in the rear of the server. See Figure 3-2
2. Pull back on the side component using the finger grips. See Figure 3-2.
3. Once the pedestal side has moved about 1/4 inch the side can be removed.
Figure 3-2 Thumb Screw Locations
1
2
3
21
Finger GripsThumb Screws
Carefully flip the server over and repeat the procedure to remove the second pedestal side.
Removing the Bezel Cover
To remove the bezel cover:
1. Release the locking tabs behind the top corners of the bezel cover. See Figure 3-3).
2. Pull the cover away from the server.
12 Pedestal to Rack Conversion