HP A8002A PCI-e Single-Port 4Gb FC adapter and A8003A PCI-e Dual-Port 4Gb FC Adapter for Linux and Windows Systems Installation Guide

Physical specifications
Table 3 lists the physical specifications.
Table 3 Physical specifications
Parameter Range
Media interface The controller interfaces to the physical media through an FC-0 Media Interface
(FC-PI compliant transceiver), and then connects through a single (FC2142SR
HBA) or dual (FC2242SR and AD300A HBAs) optical fiber LC connector.
Physical dimensions
Low-profile MD2formfactor, 6.600inchesby2.536 inches, and accommodates
both the full-height and low-profile bracket.
Power requi
rements
In a PCIe x4
slot:
5.9 watts (
typical) at +3.3 VDC
8.5 watts (
maximum) at +3.3 VDC
Agency approvals Class 1 Laser Product per DHHS 21CFR (J) & EN60825-1
UL recognized to UL60950-1:2003
CUR recognized to CSA 22.2, No. 60950-1-03
Baurt-certified by TUV to 60950-1
FCC Rules, Part 15, Class A
Industry Canada, ICES-003, Class A
EMC Directives 89/336/EEC and 2004/108/EC (CE Mark)
EN55022, Class A
EN55024
Australian EMC Framework (C-Tick Mark)
AS/NZS CISPR22:2002 Class A
Japan VCCI, Class A
Taiwan BSMI, Class A
Korea MIC, Class A
Media specifications
Use multimode fiber optic cable, with short-wave lasers, that adheres to the specifications listed in Table 4.
Table 4 Media specifi cations
Fiber Optic cable Maximum length Minimum length
Connector
62.5/125 μm(multimode)
200 MHz km bandwidth
cable
300 meters at
1.0625 Gb/s
150 m e t er s a t
2.125 Gb/s
70 meters at 4.25
Gb/s
.5 meters
LC
50
/125 μm(multimode)
50
0 MHz km bandwidth
ca
ble
500 meters at
1.0625 Gb/s
300 meters at
2.125 Gb/s
150 m e t er s a t 4 . 25
Gb/s
.5 meters
LC
A8002A PCI-e single-port 4Gb FC adapter and A8003A PCI-e dual-port 4Gb FC adapter for Linux and
Windows systems installation guide
13