HP Integrity rx3600 Server User Service Guide

Table 47 VFP System Health Description
StateLED Color
None.Off
The OS is booting or running.Green
Warning or critical fault. Check the logs for details.Flashing amber
Fatal fault. The system crashed or cannot boot. Check the
logs for details.
Flashing red
Unit Identifier Button/LED
The UID Button/LED enables you to identify a specific system in a rack or data center environment.
one UID Button/LED is located in the front panel and a second is located at the rear of the chassis.
LEDs are incorporated into the pushbuttons to save space. Both buttons are toggle switches. Push
it once to turn on the LED and push it again to turn off the LED. Press either the front panel UID
Button/LED , or enter the iLO 2 MP and LOC commands to light both the rear panel LEDs.
Diagnostics Panel LEDs
The Diagnostics Panel improves serviceability by enabling you to look in a single location for the
LEDs that provide failing FRU locating and mapping information. These amber LEDs are only lit
when a failure occurs; otherwise, they are not lit. A label on the panel is oriented similarly to the
orientation of the components within the server. A diagnostic LED exists for each FRU in the system,
including all DIMMs.
Figure 46 displays the diagnostic panel LEDs.
Figure 46 rx3600 Diagnostic Panel LEDs
Table 48 lists diagnostic panel LED states.
134 Troubleshooting