HP Integrity rx3600 Server User Service Guide

6. Lay the memory carrier assembly on side 0 or side 1 so that the memory board containing
the DIMMs that require servicing faces upward (Figure 63 (page 189)).
7. Remove the memory carrier assembly side cover.
a. Press the release tabs (Figure 63 (page 189)) on both sides of the extraction handle release
button until the side cover releases from the top center of the assembly.
b. Rotate the side cover slightly to free the tabs from the retaining slots at the base of the
assembly (Figure 22).
c. Lift the side cover off the assembly.
8. Release the DIMM from the slot.
a. Identify the DIMM you want to remove on the memory board.
b. Push the appropriate extraction levers found on either side of the DIMM slot outward to
the open position (Figure 67 (page 195)).
9. Remove the DIMM from the slot.
Figure 63 shows the memory carrier assembly removed from the chassis.
Figure 63 Memory Carrier Assembly
Figure 64 shows the memory carrier with the side cover removed.
Removing and Replacing the Memory Carrier Assembly 189