HP Integrity rx3600 Server User Service Guide

Figure 73 Processor Alignment Holes and Lock/Unlock Mechanism
Installing a Dual-Core Processor
To install a dual-core processor, follow these steps:
NOTE: Prior to installing a dual-core processor into the server, read the following instructions
carefully and see the figures in this chapter for a complete understanding of this process.
1. Power off the server and disconnect the power cables. See “Powering Off the Server”
(page 82).
2. If rack installed, slide the server out from the rack until it stops. See “Extending the Server from
the Rack” (page 164).
3. Remove the memory carrier assembly cover. See “Removing the Memory Carrier Assembly
Cover” (page 167).
204 Removing and Replacing Server Components