HP Integrity rx3600 Server User Service Guide

Figure 76 Battery Location on I/O Board

431

Core I/O Board Slot System BatteryTPM

I/O VRM

Replacing the System Battery

1. Insert the replacement battery into the socket on the I/O board assembly.

CAUTION: You must remove the I/O board assembly to service the system battery. The

removal and replacement of the I/O board assembly occurs through the rear of the rack for

rack-installed servers. Carefully follow the removal and replacement procedures; you must

perform several tasks with the server extended out the front of the rack. See “Removing and

Replacing the I/O Board Assembly” (page 206) for complete instructions.

IMPORTANT: Ensure that the new battery is fully seated and that all locking tabs are correctly

engaged.

NOTE: The positive terminal of the battery is designated by the + sign. Install the battery

with the + sign facing up.

Removing and Replacing the System Battery 211