HP Integrity rx3600 Server User Service Guide

Table 7 Hot-Pluggable Disk Drive LEDs
Disk Drive StateStatus LEDActivity LED
Offline or not configuredOffOff
Normal operation; no activityOffSolid green
Normal operation; disk read or write activityOffFlickering green
Offline, no activity; predictive failureFlashing amber at constant 1
Hz
Off
Online, no activity; predictive failureFlashing amber at constant 1
Hz
Solid green
Disk activity; predictive failureFlashing amber at constant 1
Hz
Flickering green
Offline; no activity; critical faultSolid amberOff
Offline; drive selected by locator functionSolid blue
1
Off
Drive rebuildingOffFlashing green at constant
1 Hz
1
The drive status LED is blue when you use various software utilities, such as online diagnostics and SAS drive configuration
tools.
Hot-Pluggable Disk Drive Slot Availability LEDs
The hot-pluggable disk drive slot availability LEDs are located on the front bezel in the center of
the disk drive slots (Figure 11). The illuminated LEDs indicate connection and power of the group
of SAS disk drive slots to a SAS controller.
Figure 11 shows the hot-pluggable disk drive slot availability LEDs.
Figure 11 Hot-Pluggable Disk Drive Slot Availability LEDs
DVD Drive
The server has one DVD drive or one DVD-RW drive. This device has one activity LED.
Diagnostic Panel
The diagnostics panel provides a single location to view the LEDs that provide location information
for internal system components that have a detectable failure. The LEDs illuminate solid amber only
when a failure occurs, and otherwise do not illuminate. The LEDs are visible through the diagnostic
panel on the outside of the top cover. The diagnostics panel is oriented similar to the layout of the
components in the system. Diagnostic LEDs are provided for each internal serviceable component
in the system, including all DIMMs.
Figure 12 shows the diagnostic panel label and LEDs.
Controls, Ports, and LEDs 31