Installation Guide, Seventh Edition - HP Integrity rx4640 Server

Installing Additional Components
Accessing Internal Components
Chapter 3
36
Accessing Internal Components
The following sections detail how to access the internal components of the HP Integrity rx4640 server. The
server has a front bezel, a front cover, and a top cover that need to be removed to access the internal
components. They include:
• “Removing the Front Bezel” on page 36.
• “Removing the Front Cover” on page 37.
• “Removing the Top Cover” on page 38.
Removing the Front Bezel
The server does not have to be powered off to remove the front bezel.
Figure 3-5 Removing and Replacing the Front Bezel
Removing the Front Bezel
To remove the front bezel, perform the following step:
Step 1. Grasp the front bezel at the outer edges and pull straight out.
Installing the Front Bezel
To install the front bezel, perform the following step:
Step 1. Push the front bezel straight into the chassis until it snaps into place.