Installation Guide, Seventh Edition - HP Integrity rx4640 Server

Chapter 5
Connecting Cables
LAN
62
Step 2. Loop the power cord once, and wrap the velcro strap around the power cord and the ring on the
power supply as shown in Figure 5-2.
Figure 5-2 Retention Strap Attached to Rear of Server
LAN
The server has two LAN ports that can provide network connectivity, and one iLO MP LAN port. Figure 5-3
shows the available LAN ports for the server.
Figure 5-3 Rear Panel LAN Ports
To enable general network connectivity for the server, follow these steps:
Step 1. Obtain valid IP addresses for each LAN port you plan to activate.
Step 2. Connect the LAN cable from an available LAN port into a live connection on the network.
Velcro retention strap
wrapped around
power cord and ring
on server
Core I/O LANs
10/100/1000
iLO MP 10/100 LAN