User Service Guide, Third Edition - HP Integrity rx4640 Server

Table C-1 EFI Commands (continued)
DefinitionBCH Command Parameters (PA-RISC)BCH Command
Equivalent (PA-RISC)
EFI Shell Command
Display boot-related
information
Boot infoEFI boot manager
Seconds allowed for boot
attempt
[0-200]BootTimerautoboot
Config/deconfig processor[<cpu>][ON|OFF]]CPUconfigcpuconfig
Display or set boot tests
execution
[ON|OFF] or [test] [RUN|SKIP]FastBootboottest
Read or set the date[cn:yr:mo:dy:hr:mn[:ss]]Timedate
Read or set the real time
clock
[cn:yr:mo:dy:hr:mn[:ss]]Timetime
INformation
Display all server
information
ALLinfo all
Display boot-releated
information
BootINfoinfo boot
Display cache informationCAcheinfo cpu
Display revision number of
major VLSI
ChipRevisionsinfo chiprev
Display FRU informationFRUMP command <df>
Display firmware version for
PDC, ICM, and complex
FwrVersioninfo fw
Display firmware version for
PDC, ICM, and complex
IOinfo io
Display core LAN station
address
LanAddresslanaddress
Display memory informationMemoryinfo mem
Display processor
information
PRocessorinfo cpu
SERvice
Clear (zero) the contents of
PIM
CLEARPIMerrdump clear
Read memory locations
scope of page deallocation
<addr> [<len>] [<type>]MemReadmm
Display or clear the page
deallocation table
page deallocation
table (pdt)
pdt
Display PIM information[<proc>] [HPMC|LPMC|TOC|ASIC]]processor internal
memory (PIM)
errdump mca
errdump cmc
errdump init
EFI/POSSE Commands
This section describes the EFI/POSSE commands developed for the server.
EFI/POSSE Commands 135