Hardware Installation Guide - HP Integrity rx5670 (A6837B/A6838B)

Chapter 2
Installing Additional Components
Installing Processors and Memory
29
3. Lift the memory extender board from the server chassis.
Figure 2-9 Memory Extender Board
Installing Memory
To install memory, perform the following steps:
1. Loosen the captive T-15 screws that secure the DIMM retainer to the memory extender board. (See
Figure 2-9.)
2. Remove the DIMM retainer from the memory extender board.
3. Insert the memory DIMMs as shown in Figure 2-10. (Rank and socket are also identified on the memory
extender board.)
4. Push gently and evenly on the memory DIMM until it seats in the socket.
NOTE Ensure that the extraction levers are in the closed position.
5. Repeat steps 3 and 4 until all memory DIMMs are seated in their sockets.
6. Align the DIMM retainer on the memory extender board.
ever035
Extraction Lever
Extraction
DIMM Retaine
r
Holding
Screws
Lever