Hardware Installation Guide - HP Integrity rx5670 (A6837B/A6838B)
Chapter 3
Troubleshooting
hp Integrity rx5670 LED Indicators
43
PCI Card/Backplane and I/O Status LEDs
I/O and card status is shown by LEDs on the PCI I/O cards and on the PCI backplane. LEDs associated with
the I/O connectors are shown in following figures. Many of these LEDs are located on the PCI backplane, but
are observed on the card separators and near the connectors via light pipes. Figure 3-3 shows the location of
indicators on the PCI backplane and on PCI card (seen from rear of server). Table 3-3 describes the PCI
backplane and PCI card status LEDs.










