Hardware Installation Guide - HP Integrity rx5670 (A6837B/A6838B)

Chapter 3
Troubleshooting
hp Integrity rx5670 LED Indicators
46
Figure 3-4 shows the location of indicators on the LAN/SCSI Core I/O PCI card. Table 3-4 describes the I/O
status LEDs of the LAN/SCSI Core I/O PCI card.
Figure 3-4 LAN/SCSI Core I/O Card Status LED Indicators
Table 3-4 LAN/SCSI Core I/O Card LED Definitions
Figure
Reference
Name Definition
Figure 3-4,
item 1
Enable - ext Lit when SCSI termination is enabled. This should always be lit when
system power is on.
Figure 3-4,
item 2
Ultra 160
SCSI term
power - int
Lit when internal SCSI channel termination power is on. This should always
be lit when system power is on.
Figure 3-4,
item 3
Ultra 160
SCSI term
power - ext
Lit when external SCSI channel termination power is on. This should
always be lit when system power is on.
Figure 3-4,
item 4
LAN acl Lit (green) when there is activity on the LAN interface.
Figure 3-4,
item 5
LAN - 1000 Lit (green) when the 1000 Base T interface is active.
Figure 3-4,
item 6
LAN - 100 Lit (green) when the 100 Base T interface is active.
Figure 3-4,
item 7
LAN - 10 Lit (green) when the 10 Base T interface is active.
lanioleds
1
2
3
4
5
6
7