Hardware Installation Guide - HP Integrity rx5670 (A6837B/A6838B)

Chapter 3
Troubleshooting
hp Integrity rx5670 LED Indicators
55
Table 3-9 describes the status LEDs on the system board. Open the top cover to view these LEDs,
Table 3-9 Power Supply and Fan Status LED Definitions
Indicator Name Definition
Figure 3-9,
item 1
Front fan
LED
Normally off. Lit (amber) when fan speed is lower than required. Fan errors
are reported to the system.
Figure 3-9,
item 2
Power
supply fan
LED
Normally on (green). Off and power supply is disabled when fan or power
supply fails. Power supply status is reported to the system.
Figure 3-9,
item 3
Side fan
LEDs
Normally off. Lit (amber) when fail speed is lower than required. Fan errors
are reported to the system.
Figure 3-9,
item 4
Rear fan
LED
Normally off. Lit (amber) when fan speed is lower than required. Fan errors
are reported to the system.
Figure 3-9,
item 5
Rear
power
supply fan
LEDs
Normally off. Lit (amber) when fan speed is lower than required and when the
server power converter is malfunctioning. Fan errors are reported to the
system.