Windows Integrity Enterprise Edition and Datacenter Edition Release Notes

Workaround Configure Internet Explorer to bypass the proxy server for local addresses as
follows:
1. In Internet Explorer, click Tools > Internet Options.
2. Click the Connections tab.
3. Click LAN Settings.
4. Under Proxy Server, select the Bypass proxy server for local addresses
checkbox.
Another solution is to use https://127.0.0.1:2381 instead of
https://localhost:2381.
Program terminates after error message
Issue If SMH is frequently installed and then uninstalled, or if the SMH service is
frequently stopped and then started again, the following error can be written
to the Windows application event log:
Faulting application smhstart.exe, version 2.0.0.103,
faulting module unknown, version 0.0.0.0, fault address 0x00000000
Servers All Integrity
Workaround In most cases SMH still works normally even after this message appears.
However, in rare cases when SMH terminates after this message, you should
uninstall SMH, remove the%Windisk%\hp\hpsmh folder, and reinstall SMH.
Version Control
VCRM unsupported components
Issue VCRM does not support the following components:
• HP Integrity Gigabit NC370 Series driver for Windows Server 2003 on
Itanium-based systems
• Win/Linux 133MHz 10Gbe SR Fiber Adapter Driver
• HP Integrity Gigabit Ethernet Dual-Port NIC Driver
• OpenSSH Services for HP Systems Insight Manager
• HP StorageWorks Fibre Channel Adapter Kit for the QLAxxxx STORPort
Driver for Windows Server 2003 on Itanium Based Systems
• HP StorageWorks FC-HBA Configuration Utilities by QLogic for Windows
Server 2003 Itanium Based Systems.
Servers All Integrity
Workaround There is no workaround at this time.
VCRM fails to start
Issue VCRM fails to start if SMH is uninstalled, the system rebooted, and then SMH
is reinstalled. This problem occurs only when the system is rebooted between
the SMH install and reinstall.
Servers All Integrity
Workaround Reinstall VCRM after reinstalling SMH.
VCRM updates wrong support pack
Issue VCRM uploads the English Support Pack instead of the Japanese Support Pack
when used on a Japanese OS.
Servers All Integrity
Troubleshooting Common Issues 33