HP Integrity iLO 2 Operations Guide

</> hpiLO-> badcommand
status=2
status_tag=COMMAND PROCESSING FAILED
error_tag=COMMAND NOT RECOGNIZED
</>hpiLO->
If an invalid target is specified, the response differs as follows:
</> hpiLO-> show /badtarget1
status=3
status_tag=COMMAND PROCESSING FAILED
error_tag=COMMAND SYNTAX ERROR
‘/badtarget1’ is an invalid target.
</>hpiLO->
SM CLP Syntax
The following sections provide terms, descriptions, and examples of the SM CLP syntax.
Command Line Terms
The command syntax consists of a command verb, options, target address, and properties. The
general syntax of the SM CLP command is as follows:
<verb> <options> <target> <properties>
Where:
<verb> The command verb.
<options> Selections that affect the action, behavior, or output of the verb.
<target> The implicitly or explicitly-identified managed element the command is directed
to.
<properties> Attributes of the target relative to the command execution.
Command Verbs
Command verbs select a management action for target.
The command verbs listed in Table 54 consist of several reserved words in the following categories:
Retrieve Information cd, help, show, version
Configure a target create, delete, load, set
Change target state exit, reset, start, stop
Table 54 lists the supported command verbs.
Table 54 Supported Command Verbs
ActionCommand
Changes the current default target.cd
The root of the CLP target namespace is /, and this is the starting point for a CLP system. By changing
the current default target by running cd <some target>, you can shorten commands.
For example, to find the current MP firmware version, run the command show
/map1/swinventory1/swid1. However, if you run the cd /map1/swinventory1/swid1
command, the show command displays the information.
Creates a new instance of an object.create
Deletes an instance of a target object.delete
Terminates the SM CLP session.exit
Displays context-sensitive help.help
144 Using iLO 2