HP Integrity iLO 2 Operations Guide

Table 56 SM CLP Reserved Characters and Character Sequences (continued)
Description and UsesNameCharacter or
Sequence
Separates the UFiT terms of a target address.Address term separator/

Recognized as a special target address token meaning this container.Dot.
Recognized as a special target address token meaning the container
of this container.
Dot-dot..
In a comma-separated option argument term list, delineates the values
of an argument from the next option argument.
Parentheses()
Delineates a string of text that can contain the SM CLP term separator
(space) so that the SM CLP command processor treats the delineated
text as one string.
Double quote“
Literal representation of the SM CLP prompt.SM CLP PROMPT (hyphen,
greater-than, space)
“->”
System1 Target
Target: SYSTEM1
/system1
The system1 target represents the root of the system namespace. Functions and information such
as OS console, system power status and control, system LED status, and so on, related to the system
are located under this target.
Table 57 shows system1 target properties.
Table 57 system1 Properties
Access and ValuesDescriptionProperty Name
Read-onlyProvides information about the system
power state.
EnabledState
Values:
• Enabled: System power is off.
• Disabled: System power is on.
Verbs
show Displays information about managed elements (targets, their supported properties and
verbs).
help Displays context-sensitive help.
reset Resets the system.
start Turns system power on.
stop Performs graceful shutdown of the system. If used with force option, turns system power
off.
System Reset Power Status and Power Control
This section describes the system reset power status and power control commands.
Resetting the System
To reset the system, apply the reset command to the system1 target. For example:
</>hpiLO-> reset system1
status=0
148 Using iLO 2