HP Integrity iLO 2 Operations Guide

Table 72 shows dnsserver1, dnsserver2, and dnsserver3 target properties
Table 72 dnsserver1, dnsserver2, dnsserver3 Properties
Access and ValuesDescriptionProperty Name
Read/write
The value of the property must be expressed
in dotted decimal notation.
Represents the IP address of the DNS
server.
AccessInfo
Read-only
Set to DNS server.
Represents access context (description) of
this access point.
AccessContext
Verbs
show Displays information.
help Displays context-sensitive help.
set Sets a property to a specific value.
Target: map1/settings1/dnssettings1
The dnssettings1 target contains iLO 2 DNS settings.
Table 73 shows dnssettings1 target properties.
Table 73 dnssettings1 Properties
Access and ValuesDescriptionProperty Name
Read/write
This is an array property.
Contains the IP addresses of the
primary, secondary, and tertiary
DNS servers.
DNSServerAddress
The value of each element of this
property must be expressed in
dotted decimal notation. The
elements of the property are
separated by commas
(DNSServerAddressess=192.0.2.1,
192.0.2.2, 192.0.2.3 means that
the IP addresses of the primary,
secondary and tertiary DNS servers
are set to 192.0.2.1, 192.0.2.2,
192.0.2.3 respectively).
Read/writeiLO 2 domain name.DomainName
Read/write.
The following are valid values:
Indicates whether iLO 2 registers
with the DDNS server.
RegisterThisConnections Address
Yes: register with DDNS server.
No: do not register with DDNS
server.
Read/write.iLO 2 host name.RequestedHostName
Verbs
cd Changes the current default target.
help Displays context-sensitive help.
show Displays information.
set Sets a property to a specific value.
SM CLP Network Command Examples
The following examples list specific network commands.
Determine the iLO 2 MP MAC Address
SMASH Server Management Command Line Protocol 159