HP Integrity iLO 2 Operations Guide

create Create a new user account.
delete Delete a user account.
User Account Examples
The following examples show specific user account commands.
Display all user accounts on this iLO 2
</> hpiLO-> show /map1/group1/account*
Create a new account
</map1/group1> hpiLO-> create account3 userid=testuser userpassword=testpass
name=”Test User” oemhp_privileges=console,power
Delete an account
</map1/group1> hpiLO-> delete account1
Modify account properties
</map1/group1/accuont3> hpiLO-> set oemhp_privileges=console name=”Console User”
LDAP Configuration
This section describes targets, their properties, and supported verbs used for configuring and
viewing iLO 2 LDAP settings using SM CLP.
NOTE: You can only configure LDAP with extended HP schema from the SM CLP interface.
You can configure LDAP with default schema using the iLO 2 web GUI or the iLO 2 MP TUI
Command menu.
Target: map1/settings1/oemhp_ldapsettings1
The oemhp_ldapsettings1 target represents iLO 2 LDAP directory configuration settings.
Table 77 shows oemhp_ldapsettings1 target information.
Table 77 oemhp_ldapsettings1 Properties
Access and ValuesDescriptionProperty Name
Read write.
Valid values are:
Represents the iLO 2 directory access setting.oemhp_dirauth
DefaultSchema: enable directory
authentication using default schema.
ExtendedSchema: enable directory
authentication using extended HP schema.
Disabled: disable directory authentication
Read write.
Valid values are:
Represents iLO 2 local user accounts access
setting.
oemhp_localacct
Enable: enable local iLO 2 user accounts.
Disabled: disable local iLO 2 user accounts.
Read write.IP address or hostname of the directory server.oemhp_dirsrvaddr
Read write.
Valid values are: 636, 2000-2400.
Directory server LDAP port number.oemhp_ldapport
Read write.iLO 2 object distinguished name.oemhp_dirdn
Read write.Directory user search context #1.oemhp_usercntxt1
Read write.Directory user search context #2.oemhp_usercntx2
Read write.Directory user search context #3.oemhp_usercntxt3
SMASH Server Management Command Line Protocol 167