HP Integrity iLO 2 Operations Guide
Table Of Contents
- HP Integrity iLO 2 Operations Guide
- Contents
- About This Document
- 1 Introduction to iLO 2
- Features
- Standard Features
- Always-On Capability
- Virtual Front Panel
- Multiple Access Methods
- Security
- User Access Control
- Multiple Users
- IPMI over LAN
- System Management Homepage
- Firmware Upgrades
- Internal Subsystem Information
- DHCP and DNS Support
- Group Actions
- Group Actions Using HP SIM
- SNMP
- SMASH
- SM CLP
- Mirrored Console
- Remote Power Control
- Power Regulation
- Event Logging
- Advanced Features
- Standard Features
- Obtaining and Activating iLO 2 Advanced Pack Licensing
- Supported Systems and Required Components and Cables
- Integrity iLO 2 Supported Browsers and Client Operating Systems
- Security
- Features
- 2 Ports and LEDs
- 3 Getting Connected to iLO 2
- 4 Logging In to iLO 2
- 5 Adding Advanced Features
- Lights-Out Advanced KVM Card for sx2000 Servers
- Lights-Out Advanced KVM card Requirements
- Configuring the Lights-Out Advanced KVM Card
- Lights-Out Advanced KVM Card IRC Feature
- Lights-Out Advanced KVM Card vMedia Feature
- Installing the Lights-Out Advanced KVM Card in a Server
- Lights-Out Advanced KVM Card Quick Setup Steps
- Using Lights-Out Advanced KVM Features
- Mid Range PCI Backplane Power Behavior
- Troubleshooting the Lights-Out Advanced KVM Card
- Core I/O Card Configurations
- Supported PCI-X Slots
- Upgrading the Lights-Out Advanced KVM Card Firmware
- Lights-Out Advanced KVM Card for sx2000 Servers
- 6 Accessing the Host (Operating System) Console
- 7 Configuring DHCP, DNS, LDAP, and Schema-Free LDAP
- 8 Using iLO 2
- Text User Interface
- MP Command Interfaces
- MP Main Menu
- MP Main Menu Commands
- CO (Console): Leave the MP Main Menu and enter console mode
- VFP (Virtual Front Panel): Simulate the display panel
- CM (Command Mode): Enter command mode
- SMCLP (Server Management Command Line Protocol): Switch to the SMASH SMCLP
- CL (Console Log): View the history of the console output
- SL (Show Logs): View events in the log history
- HE (Help): Display help for the menu or command in the MP Main Menu
- X (Exit): Exit iLO 2
- MP Main Menu Commands
- Command Menu
- Command Line Interface Scripting
- Command Menu Commands and Standard Command Line Scripting Syntax
- BP: Reset BMC passwords
- BLADE: Display BLADE parameters
- CA: Configure asynchronous local serial port
- DATE: Display date
- DC (Default Configuration): Reset all parameters to default configurations
- DF: Display FRU information
- DI: Disconnect LAN, WEB, SSH, or Console
- DNS: DNS settings
- FW: Upgrade the MP firmware
- HE: Display help for menu or command in command menu interface
- ID: System information settings
- IT: Inactivity timeout settings
- LC: LAN configuration usage
- LDAP: LDAP directory settings
- LM: License management
- LOC: Locator UID LED configuration
- LS: LAN status
- PC: Power control access
- PM: Power regulator mode
- PR: Power restore policy configuration
- PS: Power status
- RB: Reset BMC
- RS: Reset system through the RST signal
- SA: Set access LAN/WEB/SSH/IPMI over LAN ports
- SNMP: Configure SNMP parameters
- SO: Security option help
- SS: System Status
- SYSREV: Firmware revisions
- TC: System reset through INIT or TOC signal
- TE: Send a message to other mirroring terminals
- UC: User Configuration (users, passwords, and so on)
- WHO: Display a list of iLO 2 connected users
- XD: iLO 2 Diagnostics or reset
- Web GUI
- System Status
- Remote Serial Console
- Integrated Remote Console
- Virtual Media
- Power Management
- Administration
- BL c-Class
- Help
- SMASH Server Management Command Line Protocol
- SM CLP Features and Functionality Overview
- Accessing the SM CLP Interface
- Using the SM CLP Interface
- SM CLP Syntax
- System1 Target
- System Reset Power Status and Power Control
- Map1 (iLO 2) Target
- Text Console Services
- Firmware Revision Display and Upgrade
- Remote Access Configuration
- Network Configuration
- User Accounts Configuration
- LDAP Configuration
- Text User Interface
- 9 Installing and Configuring Directory Services
- Directory Services
- Directory Services for Active Directory
- Directory Services for eDirectory
- Installing and Initializing Snap-In for eDirectory
- Example: Creating and Configuring Directory Objects for Use with iLO 2 Devices in eDirectory
- Directory Services Objects for eDirectory
- Setting Role Restrictions
- Setting Time Restrictions
- Setting Lights-Out Management Device Rights
- Installing Snap-Ins and Extending Schema for eDirectory on a Linux Platform
- Using the LDAP Command to Configure Directory Settings in iLO 2
- User Login Using Directory Services
- Certificate Services
- Directory-Enabled Remote Management
- Directory Services Schema (LDAP)
- Glossary
- Index
hpqTargetMembership
Table 87 hpqTargetMembership
1.3.6.1.4.1.232.1001.1.1.2.3OID
This attribute provides a list of hpqTarget objects that belong to this object.Description
Distinguished Name—1.3.6.1.4.1.1466.115.121.1.12Syntax
Multi ValuedOptions
NoneRemarks
hpqRoleIPRestrictionDefault
Table 88 hpqRoleIPRestrictionDefault
1.3.6.1.4.1.232.1001.1.1.2.4OID
This attribute is a Boolean expression representing access by unspecified clients, which partially
specifies rights restrictions under an IP network address constraint.
Description
Boolean—1.3.6.1.4.1.1466.115.121.1.7Syntax
Single ValuedOptions
If this attribute is TRUE, IP restrictions are satisfied for unexceptional network clients. If this
attribute is FALSE, IP restrictions are unsatisfied for unexceptional network clients.
Remarks
hpqRoleIPRestrictions
Table 89 hpqRoleIPRestrictions
1.3.6.1.4.1.232.1001.1.1.2.5OID
This attribute provides a list of IP addresses, DNS names, domain, address ranges, and subnets,
which partially specify right restrictions under an IP network address constraint.
Description
Octet String-1.3.6.1.4.1.1466.115.121.1.40Syntax
Multi ValuedOptions
This attribute is only used on role objects. The IP restrictions are satisfied when the address
matches and general access is denied, and unsatisfied when the address matches and general
Remarks
access is allowed. Values are an identifier byte followed by a type-specific number of bytes
specifying a network address. For IP subnets, the identifier is <0x01>, followed by the IP network
address in network order, followed by the IP network subnet mask in network order. For example,
the IP subnet 127.0.0.1/255.0.0.0 would be represented as <0x01 0x7F 0x00 0x00 0x01
0xFF 0x00 0x00 0x00>. For IP ranges, the identifier is <0x02>, followed by the lower bound
IP address, followed by the upper bound IP address. Both are inclusive and in network order.
For example, the IP range 10.0.0.1 to 10.0.10.255 is represented as <0x02 0x0A 0x00 0x00
0x01 0x0A 0x00 0x0A 0xFF>. For DNS names or domains, the identifier is <0x03>, followed
by the ASCII encoded DNS name. DNS names can be prefixed with a * (ASCII 0x2A), to
indicate they should match all names that end with the specified string. For example, the DNS
domain *.acme.com is represented as <0x03 0x2A 0x2E 0x61 0x63 0x6D 0x65 0x2E 0x63
0x6F 0x6D>. General access is allowed.
hpqRoleTimeRestriction
Table 90 hpqRoleTimeRestriction
1.3.6.1.4.1.232.1001.1.1.2.6OID
This attribute represents a 7-day time grid, with 30-minute resolution, which specifies rights
restrictions under a time constraint.
Description
Octet String {42}-1.3.6.1.4.1.1466.115.121.1.40Syntax
204 Installing and Configuring Directory Services