HP Integrity iLO 2 Operations Guide
Table Of Contents
- HP Integrity iLO 2 Operations Guide
- Contents
- About This Document
- 1 Introduction to iLO 2
- Features
- Standard Features
- Always-On Capability
- Virtual Front Panel
- Multiple Access Methods
- Security
- User Access Control
- Multiple Users
- IPMI over LAN
- System Management Homepage
- Firmware Upgrades
- Internal Subsystem Information
- DHCP and DNS Support
- Group Actions
- Group Actions Using HP SIM
- SNMP
- SMASH
- SM CLP
- Mirrored Console
- Remote Power Control
- Power Regulation
- Event Logging
- Advanced Features
- Standard Features
- Obtaining and Activating iLO 2 Advanced Pack Licensing
- Supported Systems and Required Components and Cables
- Integrity iLO 2 Supported Browsers and Client Operating Systems
- Security
- Features
- 2 Ports and LEDs
- 3 Getting Connected to iLO 2
- 4 Logging In to iLO 2
- 5 Adding Advanced Features
- Lights-Out Advanced KVM Card for sx2000 Servers
- Lights-Out Advanced KVM card Requirements
- Configuring the Lights-Out Advanced KVM Card
- Lights-Out Advanced KVM Card IRC Feature
- Lights-Out Advanced KVM Card vMedia Feature
- Installing the Lights-Out Advanced KVM Card in a Server
- Lights-Out Advanced KVM Card Quick Setup Steps
- Using Lights-Out Advanced KVM Features
- Mid Range PCI Backplane Power Behavior
- Troubleshooting the Lights-Out Advanced KVM Card
- Core I/O Card Configurations
- Supported PCI-X Slots
- Upgrading the Lights-Out Advanced KVM Card Firmware
- Lights-Out Advanced KVM Card for sx2000 Servers
- 6 Accessing the Host (Operating System) Console
- 7 Configuring DHCP, DNS, LDAP, and Schema-Free LDAP
- 8 Using iLO 2
- Text User Interface
- MP Command Interfaces
- MP Main Menu
- MP Main Menu Commands
- CO (Console): Leave the MP Main Menu and enter console mode
- VFP (Virtual Front Panel): Simulate the display panel
- CM (Command Mode): Enter command mode
- SMCLP (Server Management Command Line Protocol): Switch to the SMASH SMCLP
- CL (Console Log): View the history of the console output
- SL (Show Logs): View events in the log history
- HE (Help): Display help for the menu or command in the MP Main Menu
- X (Exit): Exit iLO 2
- MP Main Menu Commands
- Command Menu
- Command Line Interface Scripting
- Command Menu Commands and Standard Command Line Scripting Syntax
- BP: Reset BMC passwords
- BLADE: Display BLADE parameters
- CA: Configure asynchronous local serial port
- DATE: Display date
- DC (Default Configuration): Reset all parameters to default configurations
- DF: Display FRU information
- DI: Disconnect LAN, WEB, SSH, or Console
- DNS: DNS settings
- FW: Upgrade the MP firmware
- HE: Display help for menu or command in command menu interface
- ID: System information settings
- IT: Inactivity timeout settings
- LC: LAN configuration usage
- LDAP: LDAP directory settings
- LM: License management
- LOC: Locator UID LED configuration
- LS: LAN status
- PC: Power control access
- PM: Power regulator mode
- PR: Power restore policy configuration
- PS: Power status
- RB: Reset BMC
- RS: Reset system through the RST signal
- SA: Set access LAN/WEB/SSH/IPMI over LAN ports
- SNMP: Configure SNMP parameters
- SO: Security option help
- SS: System Status
- SYSREV: Firmware revisions
- TC: System reset through INIT or TOC signal
- TE: Send a message to other mirroring terminals
- UC: User Configuration (users, passwords, and so on)
- WHO: Display a list of iLO 2 connected users
- XD: iLO 2 Diagnostics or reset
- Web GUI
- System Status
- Remote Serial Console
- Integrated Remote Console
- Virtual Media
- Power Management
- Administration
- BL c-Class
- Help
- SMASH Server Management Command Line Protocol
- SM CLP Features and Functionality Overview
- Accessing the SM CLP Interface
- Using the SM CLP Interface
- SM CLP Syntax
- System1 Target
- System Reset Power Status and Power Control
- Map1 (iLO 2) Target
- Text Console Services
- Firmware Revision Display and Upgrade
- Remote Access Configuration
- Network Configuration
- User Accounts Configuration
- LDAP Configuration
- Text User Interface
- 9 Installing and Configuring Directory Services
- Directory Services
- Directory Services for Active Directory
- Directory Services for eDirectory
- Installing and Initializing Snap-In for eDirectory
- Example: Creating and Configuring Directory Objects for Use with iLO 2 Devices in eDirectory
- Directory Services Objects for eDirectory
- Setting Role Restrictions
- Setting Time Restrictions
- Setting Lights-Out Management Device Rights
- Installing Snap-Ins and Extending Schema for eDirectory on a Linux Platform
- Using the LDAP Command to Configure Directory Settings in iLO 2
- User Login Using Directory Services
- Certificate Services
- Directory-Enabled Remote Management
- Directory Services Schema (LDAP)
- Glossary
- Index
Domain A grouping of hosts that is identified by a name. The hosts usually belong to the same Internet
Protocol (IP) network address.
Domain Name The unique name assigned to a system or group of systems on the Internet. The host names of all
the systems in the group have the same domain name suffix. Domain names are interpreted from
right to left.
E
Ethernet An industry-standard type of local area network (LAN) that enables real-time communication
between systems connected directly through cables. Ethernet uses a Carrier Sense Multiple
Access/Collision Detection (CSMA/CD) algorithm as its access method, which all nodes listen
for, and any node can begin transmitting data. If multiple nodes attempt to transmit at the same
time (a collision), the transmitting nodes wait for a random time before attempting to transmit
again.
Event A change in the state of a managed object. The event-handling subsystem can provide a
notification, to which a software system must respond when it occurs, but which the software did
not solicit or control.
Extended Schema A platform-specific schema derived from the common model. An example is the Win32 schema.
F
Firmware Software that is typically used to help with the initial booting stage of a system and with system
management. Firmware is embedded in read-only memory (ROM) or programmable ROM (PROM).
FPGA Field Programmable Gate Array. A semiconductor device containing programmable logic
components and programmable interconnects.
FTP File Transfer Protocol. A basic Internet protocol based on Transmission Control Protocol/Internet
Protocol (TCP/IP) that enables the retrieving and storing of files between systems on the Internet
without regard for the operating systems or architectures of the systems involved in the file transfer.
G
Gateway A computer or program that interconnects two networks and passes data packets between the
networks. A gateway has more than one network interface.
Gateway Address Where the packet needs to be sent. This can be the local network card or a gateway (router) on
the local subnet.
GUI Graphical User Interface. An interface that uses graphics, along with a keyboard and mouse, to
provide easy-to-use access to an application.
H
Host A system, such as a backend server, with an assigned Internet Protocol (IP) address and host
name. The host is accessed by other remote systems on the network.
Host Console The interface between iLO 2 and the server that controls basic functionality. Also known as
console.
Host ID Part of the 32-bit Internet Protocol (IP) address used to identify a host on a network. Host ID is
also known as DNS Name or Host Name.
Host Name The name of a particular machine within a domain. Host names always map to a specific Internet
Protocol (IP) address.
HTTP Hypertext Transfer Protocol. The Internet protocol that retrieves hypertext objects from remote
hosts. HTTP messages consist of requests from client to server, and responses from server to client.
HTTP is based on Transmission Control Protocol/Internet Protocol (TCP/IP).
I
In-band System
Management
A server management capability that is enabled only when the operating system is initialized
and the server is functioning properly.
210 Glossary