HP Integrity iLO 2 Operations Guide

system firmware. Events funnel into the BMC from different sources throughout the server. iLO 2
polls the BMC for new events and stores them in nonvolatile memory.
SL also displays the contents of the iLO 2 Event Log. The records the following events:
• iLO 2 MP login and logout attempts
• Command logging for specific commands
• All entries in the existing history log with more detail
Each time a user logs in or out of iLO 2, an event is logged. In the event of a login failure, an event
is logged if the number of continuous login failure attempts equals the password fault value.
Command logging is run for the following commands: BP, CA, DC, DI, DNS, FW, ID,
IT, LC, LDAP, LM, PC, PM, PR, RB, RS, SA, SNMP, SO, TC, UC
Events are listed as follows:
SEL: System Error Log High-attention events and errors
FPL: Forward Progress Log All events
Boot Log All events between start of boot and boot complete
Previous Boot Log The events from the previous boot
Reading the SEL is the only way to turn off the attention LED (flashing yellow light).
Table 24 lists the events and actions used to navigate within the logs.
Table 24 Events
ActionEvent
Displays the next block (forward in time)+
Displays the previous block (backward in time)-
Continues to the next or previous blockEnter (<CR>)
Dumps the entire log for capture or analysisD
Displays the first entryF
Displays the last entryL
Jumps to entry numberJ
Displays the mode configuration (hex)H
Displays the mode configuration (keyword)K
Displays the view mode configuration (text)T
Displays the alert level filter optionsA
Displays the alert level unfilteredU
Quits and returns to the Event Log Viewer MenuQ
Displays the Help Menu?
Exits and returns to the MP Main MenuCtrl-B
Integrity iLO 2 Event Log navigation provides additional filtering options as shown in Table 25.
Table 25 iLO 2 Event Log Filter Options
Filter CriteriaFiltering Option
Filter by user Login IDN: User Login
Filter by port name (Serial, Telnet, SSH, WEB)P: Port Name
78 Using iLO 2