Rack to Pedestal Conversion Guide - HP Integrity rx6600 Server

6. Pull out the Front and Rear Bottom End Foam Cushions. See Figure 2-3.

7. Locate the attachment points for the left caster wheels by finding the rivets that are the same

distance part as the holes in the caster wheel assembly.

8. Align the holes in the caster wheel assembly below the rivets on the server. Figure 2-4 shows

the left side caster wheels in place.

Figure 2-4 Caster Wheels on Raised Server

1 2

Rear Left Caster

Wheel

Front Left

Caster Wheel

9. Slide each caster wheel assembly up until it locks into place.

10. Lower server on to the pallet by removing the Side Bottom Foam Cushions. The server will

have to be lifted slightly to pull out the cushions.

Installing the Caster Wheels 11