Rack to Pedestal Conversion Guide - HP Integrity rx6600 Server

11. Place the ramp on the front of the pallet. See Figure 2-5
CAUTION: Do not roll the server off the pallet without first securing the ramp to the pallet.
TIP: The ramp may also be attached to the rear of the pallet.
Figure 2-5 Ramp Attached to Pallet
1
Pallet Ramp
12. Secure the ramp in place by inserting the screws into the pre-drilled holes. See Figure 2-6.
The ramp is secure when the screws are fully inserted, flush with ramp.
12 Rack to Pedestal Conversion